Adobe After Effects – Motorcycle Explosion Tutorial

A while ago I created a tutorial on how to use the 3D Camera Tracker in Adobe After Effects.
By accident I happened to have a motorcycle in the shot and I asked if you would like a tutorial on how to blow it up.

I promptly got a ton of requests to show you how to blow up the motorcycle – and here it is :)

How To Blow Up A Motorbike – Adobe After Effects VFX Explosion

This is the final motorcycle explosion effect we will be creating for this tutorial:

There are a number of steps involved in blowing up any object that you have in a moving camera shot and this tutorial will break the effect down step by step.

Tracking The Footage

Here is the handheld shot containing the motorcycle in question.
Now I did not film this shot with the intention of adding any visual effects so the footage is not really ideal.
It’s handheld, shaky and I don’t have a clean plate, which is the same shot without the motorcycle in it.

However, you demanded we’ll blow the motorcycle up, so let’s see what we can get out of this piece of footage!

First we need to track our footage. Apply the 3D Camera Tracker effect from the Effects & Presets Panel to the clip.

Go have a cup of coffee or some juice or whatever floats your boat and come back once the tracker is done doing it’s thing!
Hopefully all went well and you should now see a large number of 3D track points overlayed onto your footage.

Let’s create a marker in our tracked scene to identify where the motorcycle is in our 3D environment. Select a point on the body of the motorcycle, right click it and create a Null object and a camera.

I am going to call the null object ‘Motorcycle Marker’.

Creating a clean plate

Now, I mentioned I did not have a shot without the motorcycle in it. To get around this issue, I exported a frame with the motorcycle right in the middle from the video and removed the bike manually in Photoshop. Ideally, you’d want to have a photo or a video of the scene without the vehicle you want to blow up, called a clean plate, and you want to capture that clean plate at the same time you’re filming your actual scene. It took a little bit of work, but here is the clean plate I created:

Add the the clean plate into your composition as a new layer.

Trim it down to start exactly when you want the explosion to tear the motorcycle apart.

If we scrub through the footage, the motorcycle disappears, but the moment the clean plate becomes visible, the video seems to freeze. This is expected as the clean plate layer is just covering everything underneath it up.

What we need to do is position the clean plate layer properly in our 3D scene, right in front of the motorcycle.
For this, turn the layer into a 3D layer and reveal the position property on it.

Also reveal the position property on the camera and copy the current position of the camera across to the position of the clean plate. Since the camera is animated, I am doing this manually for the x, y and z coordinate.

Next, reveal the orientation property on the cover up layer and the camera and copy it from the camera to the cover up layer. Again, I am doing this one value at a time to make sure I’m not screwing anything up.

If you now go to the top view, you should see the clean plate layer and the camera at the exact same position.
Quite a bit in front of the camera, we can see the Motorcycle Marker null object we created. We now want to move our clean plate forward to just before the marker for the motorcycle. This will place the layer in 3D space at the position of the motorcycle.

Return to your active camera view and scale the cover up layer to fit exactly over your composition.

The layer should hide the motorcycle perfectly if you enable/disable it. Lower the opacity of the layer, and then draw a rough mask around the motorcycle. Here is a screenshot of the clean plate overlayed onto the motorcycle.

I am going to give the mask some feathering to blend it in a bit nicer. If we bring the opacity back to 100%, the motorcycle should be fully hidden and scrubbing through the footage, the motorcycle should disappear from the moving shot.

Now this is not perfect because the clean plate layer is just a flat layer standing at the same position as the motorcycle and as the camera moves, it starts to mis-align with the background elements, especially the pillars.

We can fix this up to some degree by animating the position of the clean plate to better match the elements it is covering up.

I am also going to expand the mask a little to ensure the motorcycle remains fully covered. Still not perfect, but for our purposes this should be sufficient.

Let’s start destroying the motorcycle!

Dismembering The Motorcycle

I am going to reuse the single with the motorcycle in it that I used to create my clean plate. Add the image into your composition and trim it to start at the same time as your actual clean plate

Turn it into a 3D layer and copy the position, orientation and scale from the clean plate layer onto this new layer. Do this one by one and ensure all transformation properties are exactly the same so the two layers are placed at the same position in 3D space.

It should now roughly look as if the motorcycle was back in its original spot.

We will duplicate this layer layer in a moment to create the charred remains of our motorcycle, so let’s darken it a bit. For this, apply a hue & saturation effect, de-saturate the layer almost entirely and bring down the master lightness.

Trim down the motorcycle layer to start exactly at the moment the clean plate layer becomes visible.

We will now break up the Motorcycle layer that sits on top of our clean plate into chunks of the motorcycle that can then be flung around by the power of the explosion. Let’s call the layer we just added ‘chunk 1’ and use a mask to cut out a big piece of the motorcycle. I will cut out the left half.

Next, we want to animate this chunk to be thrown around by the explosion. Before you start key-framing the position and rotation, grab the pen behind tool and make sure the anchor sits exactly into the middle of the fragment.

Then animate the position and rotation to make chunk 1 break off the motorcycle as it darkens. Ensure it does not accidentally slip behind the cover up layer (in 3D space) during the animation.

Here is the sequence of the first chunk of the motorcycle being pushed away towards the left side as it chars out.

Now duplicate the ‘Chunk 1’ layer and call it ‘Chunk 2’. Delete the mask and create a new mask around a different part of the motorcycle. This time, I will use the right half excluding the wheel, which I will split off separately. Like before, move the anchor to the centre of the chunk and animate it to be pushed to the side by the power of the explosion.

Repeat the same process for the front wheel. Rather than have it drop off slightly, I am going to have the wheel spin wildly and be flung out of the scene on the right to make the explosion appear more energetic. And again, let’s create yet another chunk. This one, the seat, I am going to animate to fly towards and past the camera to give the effect a bit more depth and make it look more dangerous.

Finally, I am also going to create one chunk for the tail and fling it off to the left side, rotating wildly, when the explosion hits. Of course how many chunks you want to create and how you want to animate them is entirely up to you and your personal taste and situation.

One important thing to do to make this look a little more realistic is to enable motion blur on all the bits and pieces of the motorcycle that are animated. You can do this by enabling the motion blur switch on the motorcycle chunk layers as well as on the composition.

Playing back our animation, the motorcycle should break apart and darken nicely just in time for our explosion.

Let’s add that explosion so the motorcycle looks like it’s not just falling apart due to old age!

Adding The Explosion

I am going to use stock footage elements from Action Essentials 2 by videocopilot because I think this package is probably the best action stock footage you can find If you don’t want to pay (it’s $99), you can find free stock footage elements at detonationfilms or footagecrate.

Drag your explosion element into your composition to create a new layer.

Time the explosion to occur exactly at the moment the bike breaks apart.

Turn the explosion layer into a 3D layer. Using the top view, move it to the position indicated by the Motorcycle Marker null object – just like we did with the clean plate layer.

Return to your active camera view and scale up the explosion to fit in nicely with your scene. Position it so it sit just in front of all the chunks we created for the motorcycle.

You should now have a nice big explosion on top of your motorcycle breaking apart into separate pieces.

I am actually going to add a second explosion element to make the detonation look more powerful. A simple way to do this is to duplicate the explosion layer we already added, select it, then drag your new stock footage onto it while holding down the ALT key. This will replace the contents of the layer without changing its position in the scene or any of its properties.

Feel free to position this layer any way you want to sit nicely in your shot. I’ve decided to change the blend mode of this layer to Add to blend it nicely with the layer underneath and give some more intensity to the explosion.

Next, let’s create the light that is being cast by the bike disintegrating in a ball of fire.
What we will do is create some layers to be used as mattes for our lighting.We will create some white matte layers first to define the areas where the final lighting will be visible.

For this, select your tracked footage and the 3D Camera Tracker effect assigned to it to reveal all the 3D track points. Move your cursor over the scene until you see a bulls-eye that matches the ground the motorcycle stands on. Right click and create a new solid.

Open the settings for the solid by selecting it and pressing CTRL/SHIFT + Y, change its colour to white and call it ‘Light Floor’. Next, scale it up to cover most of the ground in the scene.

Add a rough mask over the area that would receive most of the light from the explosion and feather it out. Scrub through your shot to ensure the layer and mask cover all the areas you want to receive light in the final effect.

Now, animate the opacity of the layer to fade in when the explosion strikes and then fade out very slowly as the fireball disappears.

I am going to add a small mask just on the curb because the area would remain in shadow and it will make the light look a little more realistic. Set the mask mode to subtract to remove the curb part from the Light Floor layer and add a tiny bit of feathering.

I know the lighting doesn’t look right, but remember this isn’t the final lighting layer, this is just the matte we will use on top of our lighting layer. If you are confused about mattes, check out my detailed Adobe After Effects Track Mattes tutorial.

Now repeat the process and create a light layer for the back of the scene. Again, select a flat area on the back wall in the tracked 3D scene and create a new solid.

Scale the solid up to cover the entire back area of your shot.

Add masks with different opacities to cover the different areas of your background. Remember, the brighter you make the masks, the more light the areas will receive. The more detail you add, the more realism you will add to your final motorcycle explosion VFX.

Again, animate the opacity of the back lighting matte to be in time with the motorcycle explosion

Playing back the scene, the ground the bike is standing on as well as the background of the scene should turn nice white and then the light layers will fade away.

Now let’s create the actual lighting layers. We want to use the shot of the scene without the motorcycle in it for the lighting layer.
This means that we need to pre-compose our base footage, the camera and the clean plate layer we added to hide the motorcycle.
Because we have other 3D elements in this composition and they depend on the camera, you first need to duplicate the camera in the composition.
Once you’ve duplicated the camera, select the clean plate layer, the original camera and the original footage layer and pre-compose them by pressing CTRL/SHIFT + C

I will call this composition ‘Motorcycle Vanishing’. Duplicate the new composition and place the copy directly below the Light Floor layer. Set the blend mode of this copy to Add and set the track matte option to ‘Alpha’.

Duplicate the Motorcycle Vanishing composition again, move this copy below your Light Back layer and set the blend mode to Add and the track matte option to Alpha. Both the Light Back and the Light Floor layers should now be set to invisible as they are being used as track mattes onto the two copies of the Motorcycle Vanishing layer.

The new lighting layers (Motorcycle Vanishing layer with Additive blend mode) will be visible wherever the layer directly above them is opaque so the white of our Light Floor and Light Back layers now controls how strongly we see the additive light.

That looks quite cool, but I think the lighting looks a little bit too cold. Let’s add a bit of warmth to the light to match our explosion. For this, apply a Tint effect to your lighting layers. Change the Map White To colour to yellow or orange to match your fireball.

This looks much more like the lighting you’d expect from a fiery explosion. Adjust this to your liking.

It’s a pretty cool effect already, but let’s make it even cooler by adding some finer shrapnel particles to the explosion!

Share this post

Other Posts You Might Like

8 Responses

  1. This one is awesome tuts, I’m 3d old in AE and i started to watch your basic tuts in YT because its very instructional.

  2. hi there…….i have a question about removing objects of the scene……..i have footage with person in it and there is also a rope around top of his body…….in the footage the person is being pulled by rope and i want to remove the rope so it seems that this person is being pulled by an invisible force………could please tell me how can i do that???????(sorry for my bad english grammer)

    1. Hi there, here is a video where I talk about how to remove an object from the scene: [youtube id=”LyCui6i8vuc”] You can use this technique to remove the rope

Leave a Reply

Your email address will not be published. Required fields are marked *